[PATCH 7/9] net/mlx4: Do not call pcie_print_link_status()
From: Alexandru Gagniuc <hidden>
Date: 2018-09-03 18:03:40
Also in:
linux-pci, linux-rdma, lkml
Subsystem:
mellanox mlx4 core vpi driver, networking drivers, the rest · Maintainers:
Tariq Toukan, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This is now done by the PCI core to warn of sub-optimal bandwidth. Signed-off-by: Alexandru Gagniuc <redacted> --- drivers/net/ethernet/mellanox/mlx4/main.c | 7 ------- 1 file changed, 7 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index d2d59444f562..9902fa3a2c13 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c@@ -3525,13 +3525,6 @@ static int mlx4_load_one(struct pci_dev *pdev, int pci_dev_data, } } - /* check if the device is functioning at its maximum possible speed. - * No return code for this call, just warn the user in case of PCI - * express device capabilities are under-satisfied by the bus. - */ - if (!mlx4_is_slave(dev)) - pcie_print_link_status(dev->persist->pdev); - /* In master functions, the communication channel must be initialized * after obtaining its address from fw */ if (mlx4_is_master(dev)) {
--
2.17.1