[PATCH net-next v2 02/11] dt-bindings: net: ocelot: remove hsio from the list of register address spaces
From: Quentin Schulz <hidden>
Date: 2018-09-03 09:34:57
Also in:
linux-devicetree, linux-mips, lkml
Subsystem:
microsemi mips socs, mips, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Alexandre Belloni, Thomas Bogendoerfer, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
HSIO register address space should be handled outside of the MAC controller as there are some registers for PLL5 configuring, SerDes/switch port muxing and a thermal sensor IP, so let's remove it. Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Quentin Schulz <redacted> --- Documentation/devicetree/bindings/mips/mscc.txt | 16 ++++++++++++++++ .../devicetree/bindings/net/mscc-ocelot.txt | 9 +++------ 2 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/mips/mscc.txt b/Documentation/devicetree/bindings/mips/mscc.txt
index ae15ec333542..bc817e984628 100644
--- a/Documentation/devicetree/bindings/mips/mscc.txt
+++ b/Documentation/devicetree/bindings/mips/mscc.txt@@ -41,3 +41,19 @@ Example: compatible = "mscc,ocelot-cpu-syscon", "syscon"; reg = <0x70000000 0x2c>; }; + +o HSIO regs: + +The SoC has a few registers (HSIO) handling miscellaneous functionalities: +configuration and status of PLL5, RCOMP, SyncE, SerDes configurations and +status, SerDes muxing and a thermal sensor. + +Required properties: +- compatible: Should be "mscc,ocelot-hsio", "syscon", "simple-mfd" +- reg : Should contain registers location and length + +Example: + syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + };
diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
index 0a84711abece..9e5c17d426ce 100644
--- a/Documentation/devicetree/bindings/net/mscc-ocelot.txt
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt@@ -12,7 +12,6 @@ Required properties: - "sys" - "rew" - "qs" - - "hsio" - "qsys" - "ana" - "portX" with X from 0 to the number of last port index available on that
@@ -45,7 +44,6 @@ Example: reg = <0x1010000 0x10000>, <0x1030000 0x10000>, <0x1080000 0x100>, - <0x10d0000 0x10000>, <0x11e0000 0x100>, <0x11f0000 0x100>, <0x1200000 0x100>,
@@ -59,10 +57,9 @@ Example: <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "hsio", "port0", - "port1", "port2", "port3", "port4", "port5", - "port6", "port7", "port8", "port9", "port10", - "qsys", "ana"; + reg-names = "sys", "rew", "qs", "port0", "port1", "port2", + "port3", "port4", "port5", "port6", "port7", + "port8", "port9", "port10", "qsys", "ana"; interrupts = <21 22>; interrupt-names = "xtr", "inj";
--
2.17.1