[PATCH v2 net-next 7/8] net: ethernet: xgbe: expand PHY_GBIT_FEAUTRES
From: Andrew Lunn <andrew@lunn.ch>
Date: 2018-09-30 03:35:50
Subsystem:
amd xgbe driver, networking drivers, the rest · Maintainers:
Raju Rangoju, Prashanth Kumar K R, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The macro PHY_GBIT_FEAUTRES needs to change into a bitmap in order to support link_modes. Remove its use from xgde by replacing it with its definition. Probably, the current behavior is wrong. It probably should be ANDing not assigning. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- v2 Remove unneeded () --- drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
index a7e03e3ecc93..151bdb629e8a 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c@@ -878,8 +878,9 @@ static bool xgbe_phy_finisar_phy_quirks(struct xgbe_prv_data *pdata) phy_write(phy_data->phydev, 0x04, 0x0d01); phy_write(phy_data->phydev, 0x00, 0x9140); - phy_data->phydev->supported = PHY_GBIT_FEATURES; - phy_data->phydev->advertising = phy_data->phydev->supported; + phy_data->phydev->supported = PHY_10BT_FEATURES | + PHY_100BT_FEATURES | + PHY_1000BT_FEATURES; phy_support_asym_pause(phy_data->phydev); netif_dbg(pdata, drv, pdata->netdev,
@@ -950,8 +951,9 @@ static bool xgbe_phy_belfuse_phy_quirks(struct xgbe_prv_data *pdata) reg = phy_read(phy_data->phydev, 0x00); phy_write(phy_data->phydev, 0x00, reg & ~0x00800); - phy_data->phydev->supported = PHY_GBIT_FEATURES; - phy_data->phydev->advertising = phy_data->phydev->supported; + phy_data->phydev->supported = (PHY_10BT_FEATURES | + PHY_100BT_FEATURES | + PHY_1000BT_FEATURES); phy_support_asym_pause(phy_data->phydev); netif_dbg(pdata, drv, pdata->netdev,
--
2.19.0.rc1