On Wed, Sep 19, 2018 at 11:27:31AM -0600, Jason Gunthorpe wrote:

On Mon, Sep 17, 2018 at 02:03:55PM +0300, Leon Romanovsky wrote:

quoted

From: Yishai Hadas <redacted>

Set uid as part of QP commands so that the firmware can manage the
QP object in a secured way.

That will enable using a QP that was created by verbs application to
be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <redacted>
Signed-off-by: Leon Romanovsky <redacted>
 drivers/net/ethernet/mellanox/mlx5/core/qp.c | 45 +++++++++++++++++-----------
 include/linux/mlx5/mlx5_ifc.h                | 22 +++++++-------
 include/linux/mlx5/qp.h                      |  1 +
 3 files changed, 39 insertions(+), 29 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/qp.c b/drivers/net/ethernet/mellanox/mlx5/core/qp.c
index 4ca07bfb6b14..04f72a1cdbcc 100644
+++ b/drivers/net/ethernet/mellanox/mlx5/core/qp.c

@@ -240,6 +240,7 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
 	if (err)
 		return err;

+	qp->uid = MLX5_GET(create_qp_in, in, uid);
 	qp->qpn = MLX5_GET(create_qp_out, out, qpn);
 	mlx5_core_dbg(dev, "qpn = 0x%x\n", qp->qpn);

@@ -261,6 +262,7 @@ int mlx5_core_create_qp(struct mlx5_core_dev *dev,
 	memset(dout, 0, sizeof(dout));
 	MLX5_SET(destroy_qp_in, din, opcode, MLX5_CMD_OP_DESTROY_QP);
 	MLX5_SET(destroy_qp_in, din, qpn, qp->qpn);
+	MLX5_SET(destroy_qp_in, din, uid, qp->uid);
 	mlx5_cmd_exec(dev, din, sizeof(din), dout, sizeof(dout));
 	return err;
 }

@@ -320,6 +322,7 @@ int mlx5_core_destroy_qp(struct mlx5_core_dev *dev,

 	MLX5_SET(destroy_qp_in, in, opcode, MLX5_CMD_OP_DESTROY_QP);
 	MLX5_SET(destroy_qp_in, in, qpn, qp->qpn);
+	MLX5_SET(destroy_qp_in, in, uid, qp->uid);
 	err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
 	if (err)
 		return err;

@@ -373,7 +376,7 @@ static void mbox_free(struct mbox_info *mbox)

 static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
 				u32 opt_param_mask, void *qpc,
-				struct mbox_info *mbox)
+				struct mbox_info *mbox, u16 uid)
 {
 	mbox->out = NULL;
 	mbox->in = NULL;

@@ -381,26 +384,32 @@ static int modify_qp_mbox_alloc(struct mlx5_core_dev *dev, u16 opcode, int qpn,
 #define MBOX_ALLOC(mbox, typ)  \
 	mbox_alloc(mbox, MLX5_ST_SZ_BYTES(typ##_in), MLX5_ST_SZ_BYTES(typ##_out))

-#define MOD_QP_IN_SET(typ, in, _opcode, _qpn) \
-	MLX5_SET(typ##_in, in, opcode, _opcode); \
-	MLX5_SET(typ##_in, in, qpn, _qpn)
-
-#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc) \
-	MOD_QP_IN_SET(typ, in, _opcode, _qpn); \
-	MLX5_SET(typ##_in, in, opt_param_mask, _opt_p); \
-	memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), _qpc, MLX5_ST_SZ_BYTES(qpc))
+#define MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid) \
+	do { \
+		MLX5_SET(typ##_in, in, opcode, _opcode); \
+		MLX5_SET(typ##_in, in, qpn, _qpn); \
+		MLX5_SET(typ##_in, in, uid, _uid); \
+	} while (0)
+
+#define MOD_QP_IN_SET_QPC(typ, in, _opcode, _qpn, _opt_p, _qpc, _uid) \
+	do { \
+		MOD_QP_IN_SET(typ, in, _opcode, _qpn, _uid); \
+		MLX5_SET(typ##_in, in, opt_param_mask, _opt_p); \
+		memcpy(MLX5_ADDR_OF(typ##_in, in, qpc), \
+		       _qpc, MLX5_ST_SZ_BYTES(qpc)); \
+	} while (0)

These should get touched by clang-format to follow the usual
formatting for macros..

Thanks, we will do.

Jason