Re: [PATCH] Revert "net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmit"
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: 2018-08-29 18:06:05
Also in:
linux-amlogic, lkml
On Wed, Aug 29, 2018 at 8:03 PM Martin Blumenstingl [off-list ref] wrote: [snip]
from that point on: # dmesg | tail -n 4 [ 47.782778] RTL8211F Gigabit Ethernet 0.2009087f:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.2009087f:00, irq=30) [ 47.803540] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found [ 47.805505] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW [ 50.311975] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
I forgot to mention: after traffic doesn't flow anymore there are no additional messages in the kernel log thus the output of "dmesg | tail -n 4" is identical before and after the test run Regards Martin