[PATCH v2] can: m_can: Fix runtime resume call
From: Faiz Abbas <hidden>
Date: 2018-07-03 11:09:27
Also in:
linux-can, linux-omap, lkml
Subsystem:
can network drivers, mcan device driver, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Markus Schneider-Pargmann, Linus Torvalds
pm_runtime_get_sync() returns a 1 if the state of the device is already 'active'. This is not a failure case and should return a success. Therefore fix error handling for pm_runtime_get_sync() call such that it returns success when the value is 1. Also cleanup the TODO for using runtime PM for sleep mode as that is implemented. Signed-off-by: Faiz Abbas <redacted> --- Changes in v2: rebased to latest mainline drivers/net/can/m_can/m_can.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c
index b397a33f3d32..ac4c6dc2f8c8 100644
--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c@@ -634,10 +634,12 @@ static int m_can_clk_start(struct m_can_priv *priv) int err; err = pm_runtime_get_sync(priv->device); - if (err) + if (err < 0) { pm_runtime_put_noidle(priv->device); + return err; + } - return err; + return 0; } static void m_can_clk_stop(struct m_can_priv *priv)
@@ -1687,8 +1689,6 @@ static int m_can_plat_probe(struct platform_device *pdev) return ret; } -/* TODO: runtime PM with power down or sleep mode */ - static __maybe_unused int m_can_suspend(struct device *dev) { struct net_device *ndev = dev_get_drvdata(dev);
--
2.17.0