[PATCH net-next 3/5] net: gemini: Allow multiple ports to instantiate

The code was not tested with two ports actually in use at
the same time. (I blame this on lack of actual hardware using
that feature.) Now after locating a system using both ports,
add necessary fix to make both ports come up.

Signed-off-by: Linus Walleij <redacted>
---
 drivers/net/ethernet/cortina/gemini.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index b49ed8964026..8d192fcd51c8 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c

@@ -1787,7 +1787,10 @@ static int gmac_open(struct net_device *netdev)
 	phy_start(netdev->phydev);
 
 	err = geth_resize_freeq(port);
-	if (err) {
+	/* It's fine if it's just busy, the other port has set up
+	 * the freeq in that case.
+	 */
+	if (err && (err != -EBUSY)) {
 		netdev_err(netdev, "could not resize freeq\n");
 		goto err_stop_phy;
 	}

-- 
2.17.1