Thread (25 messages) flat view 25 messages, 6 authors, 2018-08-20

Re: [PATCH V2 net-next 5/6] macvlan/macvtap: Add support for SCTP checksum offload.

From: Vlad Yasevich <hidden>
Date: 2018-05-02 14:00:22
Also in: linux-sctp

On 05/02/2018 09:46 AM, Michael S. Tsirkin wrote:
On Wed, May 02, 2018 at 09:27:00AM -0400, Vlad Yasevich wrote:
quoted
On 05/01/2018 11:24 PM, Michael S. Tsirkin wrote:
quoted
On Tue, May 01, 2018 at 10:07:38PM -0400, Vladislav Yasevich wrote:
quoted
Since we now have support for software CRC32c offload, turn it on
for macvlan and macvtap devices so that guests can take advantage
of offload SCTP checksums to the host or host hardware.

Signed-off-by: Vladislav Yasevich <redacted>
---
 drivers/net/macvlan.c | 5 +++--
 drivers/net/tap.c     | 8 +++++---
 2 files changed, 8 insertions(+), 5 deletions(-)
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 725f4b4..646b730 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -834,7 +834,7 @@ static struct lock_class_key macvlan_netdev_addr_lock_key;
 
 #define ALWAYS_ON_OFFLOADS \
 	(NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_GSO_SOFTWARE | \
-	 NETIF_F_GSO_ROBUST | NETIF_F_GSO_ENCAP_ALL)
+	 NETIF_F_GSO_ROBUST | NETIF_F_GSO_ENCAP_ALL | NETIF_F_SCTP_CRC)
 
 #define ALWAYS_ON_FEATURES (ALWAYS_ON_OFFLOADS | NETIF_F_LLTX)
 
@@ -842,7 +842,8 @@ static struct lock_class_key macvlan_netdev_addr_lock_key;
 	(NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA | NETIF_F_FRAGLIST | \
 	 NETIF_F_GSO | NETIF_F_TSO | NETIF_F_LRO | \
 	 NETIF_F_TSO_ECN | NETIF_F_TSO6 | NETIF_F_GRO | NETIF_F_RXCSUM | \
-	 NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER)
+	 NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_STAG_FILTER | \
+	 NETIF_F_SCTP_CRC)
 
 #define MACVLAN_STATE_MASK \
 	((1<<__LINK_STATE_NOCARRIER) | (1<<__LINK_STATE_DORMANT))
diff --git a/drivers/net/tap.c b/drivers/net/tap.c
index 9b6cb78..2c8512b 100644
--- a/drivers/net/tap.c
+++ b/drivers/net/tap.c
@@ -369,8 +369,7 @@ rx_handler_result_t tap_handle_frame(struct sk_buff **pskb)
 		 *	  check, we either support them all or none.
 		 */
 		if (skb->ip_summed == CHECKSUM_PARTIAL &&
-		    !(features & NETIF_F_CSUM_MASK) &&
-		    skb_checksum_help(skb))
+		    skb_csum_hwoffload_help(skb, features))
 			goto drop;
 		if (ptr_ring_produce(&q->ring, skb))
 			goto drop;
@@ -945,6 +944,9 @@ static int set_offload(struct tap_queue *q, unsigned long arg)
 		}
 	}
 
+	if (arg & TUN_F_SCTP_CSUM)
+		feature_mask |= NETIF_F_SCTP_CRC;
+
so this still affects TX, shouldn't this affect RX instead?
There is no bit to set on the RX path just like there is no bit to set on the RX patch
for TUN_F_CSUM.

We only invert TSO offloads, not checksum offloads as the comment below states.
For checksum,  macvtap has to compute the checksum itself in tap_handle_frame() above.
It uses tx feature bits to see if needs do to the checksum.

If you think we need another flag to macvtap to control RXCSUM, that would need to be
separate and cover standard TCP checksum as well.

-vlad
Confused. What is the meaning of TUN_F_SCTP_CSUM? I assume this is
a way for userspace to tell tun device: "I can handle
packets without SCTP checksum, pls send them my way".
Yes,  just as TUN_F_CSUM means that tun device can handle packets with
partial tcp/udp checksum.
Now what is the implication for macvtap? 
The implication is exactly the same as for TUN_F_CSUM.  If the
flag is set on the macvtap device, the TX checksum feature is
turned on.
And why  are
you setting NETIF_F_SCTP_CRC which is a flag
that affects packets sent by guest to host?
Mainly its because we are using just 1 flag to control checksum
offloading and we need to be able control both tx and rx paths.

What you are suggesting that we either invert what TUN_F_CSUM
is doing in macvtap case, or have another flag that lets us control
TX and RX paths separately.

Either case, that would be separate work.
-vlad
quoted
quoted
quoted
 	/* tun/tap driver inverts the usage for TSO offloads, where
 	 * setting the TSO bit means that the userspace wants to
 	 * accept TSO frames and turning it off means that user space
@@ -1077,7 +1079,7 @@ static long tap_ioctl(struct file *file, unsigned int cmd,
 	case TUNSETOFFLOAD:
 		/* let the user check for future flags */
 		if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
-			    TUN_F_TSO_ECN | TUN_F_UFO))
+			    TUN_F_TSO_ECN | TUN_F_UFO | TUN_F_SCTP_CSUM))
 			return -EINVAL;
 
 		rtnl_lock();
-- 
2.9.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help