[PATCH net-next 05/12] dt-bindings: net: dwmac-sun8i: Add binding for GMAC on Allwinner R40 SoC
From: Chen-Yu Tsai <hidden>
Date: 2018-03-17 09:28:50
Also in:
linux-arm-kernel, linux-clk, linux-devicetree
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The Allwinner R40 SoC has the EMAC controller supported by dwmac-sun8i. It is named "GMAC", while EMAC refers to the 10/100 Mbps Ethernet controller supported by sun4i-emac. The controller is the same, but the R40 has the glue layer controls in the clock control unit (CCU), with a reduced RX delay chain, and no TX delay chain. This patch adds the R40 specific bits to the dwmac-sun8i binding. Signed-off-by: Chen-Yu Tsai <redacted> --- Documentation/devicetree/bindings/net/dwmac-sun8i.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 74b3ef79e57a..fe4a48a1eb50 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt@@ -7,6 +7,7 @@ Required properties: - compatible: must be one of the following string: "allwinner,sun8i-a83t-emac" "allwinner,sun8i-h3-emac" + "allwinner,sun8i-r40-gmac" "allwinner,sun8i-v3s-emac" "allwinner,sun50i-a64-emac" - reg: address and length of the register for the device.
@@ -24,14 +25,17 @@ Required properties: compatible string: - allwinner,sun8i-a83t-system-controller - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-r40-ccu - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller Optional properties: - allwinner,tx-delay-ps: TX clock delay chain value in ps. Range is 0-700. Default is 0. + Unavailable for allwinner,sun8i-r40-gmac - allwinner,rx-delay-ps: RX clock delay chain value in ps. Range is 0-3100. Default is 0. + Range is 0-700 for allwinner,sun8i-r40-gmac Both delay properties need to be a multiple of 100. They control the clock delay for external RGMII PHY. They are do apply to the internal PHY or external non-RGMII PHYs.
--
2.16.2