Re: [PATCH net-next 2/8] dt-bindings: net: add DT bindings for Microsemi MIIM
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2018-03-23 21:46:43
Also in:
linux-devicetree, linux-mips, lkml
On 03/23/2018 01:11 PM, Alexandre Belloni wrote:
quoted hunk ↗ jump to hunk
DT bindings for the Microsemi MII Management Controller found on Microsemi SoCs Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- .../devicetree/bindings/net/mscc-miim.txt | 25 ++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mscc-miim.txtdiff --git a/Documentation/devicetree/bindings/net/mscc-miim.txt b/Documentation/devicetree/bindings/net/mscc-miim.txt new file mode 100644 index 000000000000..711ac9ab853c --- /dev/null +++ b/Documentation/devicetree/bindings/net/mscc-miim.txt@@ -0,0 +1,25 @@ +Microsemi MII Management Controller (MIIM) / MDIO +================================================= + +Properties: +- compatible: must be "mscc,ocelot-miim" +- reg: The base address of the MDIO bus controller register bank. Optionally, a + second register bank can be defined if there is an associated reset register + for internal PHYs +- #address-cells: Must be <1>. +- #size-cells: Must be <0>. MDIO addresses have no size component.
Missing interrupt property documentation (sorry), other than that: Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> -- Florian