[PATCH net-next 5/6] enic: enable rq before updating rq descriptors
flat view
STALE3147d
From: Govindarajulu Varadarajan <hidden>
Date: 2018-03-02 02:20:54
Subsystem:
cisco vic ethernet nic driver, networking drivers, the rest · Maintainers:
Satish Kharat, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
rq should be enabled before posting the buffers to rq desc. If not hw sees stale value and casuses DMAR errors. Signed-off-by: Govindarajulu Varadarajan <redacted> --- drivers/net/ethernet/cisco/enic/enic_main.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/cisco/enic/enic_main.c b/drivers/net/ethernet/cisco/enic/enic_main.c
index 5213bc01a6e9..243d5c5fd5e3 100644
--- a/drivers/net/ethernet/cisco/enic/enic_main.c
+++ b/drivers/net/ethernet/cisco/enic/enic_main.c@@ -1939,6 +1939,8 @@ static int enic_open(struct net_device *netdev) } for (i = 0; i < enic->rq_count; i++) { + /* enable rq before updating rq desc */ + vnic_rq_enable(&enic->rq[i]); vnic_rq_fill(&enic->rq[i], enic_rq_alloc_buf); /* Need at least one buffer on ring to get going */ if (vnic_rq_desc_used(&enic->rq[i]) == 0) {
@@ -1950,8 +1952,6 @@ static int enic_open(struct net_device *netdev) for (i = 0; i < enic->wq_count; i++) vnic_wq_enable(&enic->wq[i]); - for (i = 0; i < enic->rq_count; i++) - vnic_rq_enable(&enic->rq[i]); if (!enic_is_dynamic(enic) && !enic_is_sriov_vf(enic)) enic_dev_add_station_addr(enic);
@@ -1977,8 +1977,12 @@ static int enic_open(struct net_device *netdev) return 0; err_out_free_rq: - for (i = 0; i < enic->rq_count; i++) + for (i = 0; i < enic->rq_count; i++) { + err = vnic_rq_disable(&enic->rq[i]); + if (err) + return err; vnic_rq_clean(&enic->rq[i], enic_free_rq_buf); + } enic_dev_notify_unset(enic); err_out_free_intr: enic_unset_affinity_hint(enic);
--
2.16.2