[PATCH net 1/3] lan78xx: Set ASD in MAC_CR when EEE is enabled.
flat view
STALE3135d
From: Raghuram Chary J <hidden>
Date: 2018-03-22 07:38:08
Subsystem:
networking drivers, the rest, usb lan78xx ethernet driver, usb networking drivers · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds, Thangaraj Samynathan
Description:
EEE does not work with lan7800 when AutoSpeed is not set.
(This can happen when EEPROM is not populated or configured incorrectly)
Root-Cause:
When EEE is enabled, the mac config register ASD is not set
i.e in default state,causing EEE fail.
Fix:
Set the register when eeprom is not present.
Fixes: 55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Raghuram Chary J <redacted>
---
drivers/net/usb/lan78xx.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
index 11176070b345..e2d26f9c0f6a 100644
--- a/drivers/net/usb/lan78xx.c
+++ b/drivers/net/usb/lan78xx.c@@ -2351,6 +2351,7 @@ static int lan78xx_reset(struct lan78xx_net *dev) u32 buf; int ret = 0; unsigned long timeout; + u8 sig; ret = lan78xx_read_reg(dev, HW_CFG, &buf); buf |= HW_CFG_LRST_;
@@ -2450,6 +2451,15 @@ static int lan78xx_reset(struct lan78xx_net *dev) /* LAN7801 only has RGMII mode */ if (dev->chipid == ID_REV_CHIP_ID_7801_) buf &= ~MAC_CR_GMII_EN_; + + if(dev->chipid == ID_REV_CHIP_ID_7800_) { + ret = lan78xx_read_raw_eeprom(dev, 0, 1, &sig); + if ((!ret) && (sig != EEPROM_INDICATOR)) { + /*Implies there is no external eeprom. Set mac speed*/ + netdev_info(dev->net, "No External EEPROM. Setting MAC Speed \n"); + buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_; + } + } ret = lan78xx_write_reg(dev, MAC_CR, buf); ret = lan78xx_read_reg(dev, MAC_TX, &buf);
--
2.16.2