[PATCH net-next 5/5] net: phy: marvell10g: Utilize gen10g_soft_reset()
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2018-02-28 19:37:19
Also in:
lkml
Subsystem:
ethernet phy library, marvell mv88x3310 phy driver, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Russell King, Marek Behún, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
We do the same thing as the generic function: nothing, so utilize it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/phy/marvell10g.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 8a0bd98fdec7..da014eae1476 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c@@ -75,11 +75,6 @@ static int mv3310_probe(struct phy_device *phydev) * Resetting the MV88X3310 causes it to become non-responsive. Avoid * setting the reset bit(s). */ -static int mv3310_soft_reset(struct phy_device *phydev) -{ - return 0; -} - static int mv3310_config_init(struct phy_device *phydev) { __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
@@ -377,7 +372,7 @@ static struct phy_driver mv3310_drivers[] = { SUPPORTED_10000baseT_Full | SUPPORTED_Backplane, .probe = mv3310_probe, - .soft_reset = mv3310_soft_reset, + .soft_reset = gen10g_soft_reset, .config_init = mv3310_config_init, .config_aneg = mv3310_config_aneg, .aneg_done = mv3310_aneg_done,
--
2.14.1