[PATCH v2 05/10] arm64: dts: renesas: v3msk: Override EtherAVB phy-mode
STALE3138d
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
Date: 2018-02-27 10:23:43
Also in:
linux-arm-kernel, linux-devicetree, linux-renesas-soc, lkml
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
As the PHY interface installed on the V3MSK board provides TX and RX channels delays, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the r8a77970 SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
index 8624ca8..bb554ee 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts@@ -34,6 +34,7 @@ &avb { renesas,no-ether-link; phy-handle = <&phy0>; + phy-mode = "rgmii-id"; status = "okay"; phy0: ethernet-phy@0 {
--
2.7.4