[PATCH 1/8] arm64: dts: renesas: salvator-common: Override EtherAVB phy-mode
flat view
STALE3154d
SUPERSEDED
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
Date: 2018-02-26 17:57:45
Also in:
linux-arm-kernel, linux-devicetree, linux-iommu, linux-renesas-soc, lkml
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v2 [diff vs current]
As the PHY interface installed on the Salvator-X[S] board, provides TX channel delay, make the "phy-mode" property a board-specific one, meant to override the one specified in the SoC DTSI. Follow up patches will reset the SoC DTSI to use "rgmii" mode and let the board file override that. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> --- arch/arm64/boot/dts/renesas/salvator-common.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi
index 8e8ec30..c725f9b 100644
--- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi@@ -279,6 +279,7 @@ pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; phy-handle = <&phy0>; + phy-mode = "rgmii-txid"; status = "okay"; phy0: ethernet-phy@0 {
--
2.7.4