[PATCH net-next 2/4] net/mlx4_en: Remove unnecessary warn print in reset config
From: Tariq Toukan <hidden>
Date: 2018-02-27 14:17:31
Subsystem:
mellanox ethernet driver (mlx4_en), mellanox mlx4 core vpi driver, networking drivers, the rest · Maintainers:
Tariq Toukan, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Eran Ben Elisha <redacted> In mlx4_en_reset_config, there was a redundant warn print that was left from previous versions of this function. No warn is needed anymore. This warn can be confusing when RX-FCS is changed: Turn OFF RX-FCS: mlx4_en: eth1: Changing device configuration rx filter(0) rx vlan(1) Turn ON RX-FCS: mlx4_en: eth1: Changing device configuration rx filter(0) rx vlan(1) Signed-off-by: Eran Ben Elisha <redacted> Signed-off-by: Tariq Toukan <redacted> --- drivers/net/ethernet/mellanox/mlx4/en_netdev.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
index b62d2c3f976a..e0adac4a9a19 100644
--- a/drivers/net/ethernet/mellanox/mlx4/en_netdev.c
+++ b/drivers/net/ethernet/mellanox/mlx4/en_netdev.c@@ -3634,10 +3634,6 @@ int mlx4_en_reset_config(struct net_device *dev, mlx4_en_stop_port(dev, 1); } - en_warn(priv, "Changing device configuration rx filter(%x) rx vlan(%x)\n", - ts_config.rx_filter, - !!(features & NETIF_F_HW_VLAN_CTAG_RX)); - mlx4_en_safe_replace_resources(priv, tmp); if (DEV_FEATURE_CHANGED(dev, features, NETIF_F_HW_VLAN_CTAG_RX)) {
--
1.8.3.1