Re: [PATCH v2] b43: Replace mdelay with usleep_range in b43_radio_2057_init_post

b43_radio_2057_init_post is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with usleep_range, 
to reduce busy wait.

Signed-off-by: Jia-Ju Bai <redacted>
---
v2:
* Replace mdelay with usleep_range, instead of msleep in v1.
  Thank Larry for good advice.
---
 drivers/net/wireless/broadcom/b43/phy_n.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43/phy_n.c b/drivers/net/wireless/broadcom/b43/phy_n.c
index a5557d7..f2a2f41 100644
--- a/drivers/net/wireless/broadcom/b43/phy_n.c
+++ b/drivers/net/wireless/broadcom/b43/phy_n.c

@@ -1031,7 +1031,7 @@ static void b43_radio_2057_init_post(struct b43_wldev *dev)
 
 	b43_radio_set(dev, R2057_RFPLL_MISC_CAL_RESETN, 0x78);
 	b43_radio_set(dev, R2057_XTAL_CONFIG2, 0x80);
-	mdelay(2);
+	usleep_range(2000, 3000);