Re: b43: Replace mdelay with msleep in b43_radio_2057_init_post

Larry Finger [off-list ref] writes:

On 01/08/2018 10:21 AM, Kalle Valo wrote:

quoted

Jia-Ju Bai [off-list ref] wrote:

quoted

b43_radio_2057_init_post is not called in an interrupt handler
nor holding a spinlock.
The function mdelay in it can be replaced with msleep, to reduce busy wait.

Signed-off-by: Jia-Ju Bai <redacted>

You submitted an identical patch a week earlier:

https://patchwork.kernel.org/patch/10137671/

How is this different? Also always add version number to the patch so that the
maintainers can follow the changes easily:

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#patch_version_missing

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#changelog_missing

I had negative comments on one of those due to the possibility of
msleep(2) extending as long as 20 msec. Until the author, or someone
else, can test that this is OK, then the mdelay(2) can only be
replaced with usleep_range(2000, 3000).

NACK for both.

Ok, patches dropped.

-- 
Kalle Valo