[net-next v3 14/14] i40e: track id can be 0
flat view
From: Jeff Kirsher <hidden>
Date: 2018-01-10 20:47:36
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Jingjing Wu <redacted> track_id == 0 is valid for “read only” profiles when profile does not have any “write” commands. Signed-off-by: Jingjing Wu <redacted> Tested-by: Andrew Bowers <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/i40e/i40e_common.c | 5 ----- drivers/net/ethernet/intel/i40evf/i40e_common.c | 5 ----- 2 files changed, 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index a196c3d305ab..40c5f7628aa1 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c@@ -5364,11 +5364,6 @@ i40e_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, u32 offset = 0, info = 0; u32 i; - if (!track_id) { - i40e_debug(hw, I40E_DEBUG_PACKAGE, "Track_id can't be 0."); - return I40E_NOT_SUPPORTED; - } - dev_cnt = profile->device_table_count; for (i = 0; i < dev_cnt; i++) {
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_common.c b/drivers/net/ethernet/intel/i40evf/i40e_common.c
index c1e473219957..a94648429a5b 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_common.c@@ -1330,11 +1330,6 @@ i40evf_write_profile(struct i40e_hw *hw, struct i40e_profile_segment *profile, u32 offset = 0, info = 0; u32 i; - if (!track_id) { - i40e_debug(hw, I40E_DEBUG_PACKAGE, "Track_id can't be 0."); - return I40E_NOT_SUPPORTED; - } - dev_cnt = profile->device_table_count; for (i = 0; i < dev_cnt; i++) {
--
2.15.1