[PATCH net-next 2/2] net: bcmgenet: remove parameter new_link from phy_mac_interrupt()
From: Heiner Kallweit <hkallweit1@gmail.com>
Date: 2018-01-10 20:11:47
Subsystem:
broadcom genet ethernet driver, networking drivers, the rest · Maintainers:
Doug Berger, Florian Fainelli, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Reflect a phylib API change and remove second parameter from call to phy_mac_interrupt(). Keep the current logic and set phydev->link, although this may not be needed. However I don't have the hardware and can't test this. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 77154f147..db97873cd 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c@@ -2527,9 +2527,10 @@ static void bcmgenet_irq_task(struct work_struct *work) spin_unlock_irq(&priv->lock); /* Link UP/DOWN event */ - if (status & UMAC_IRQ_LINK_EVENT) - phy_mac_interrupt(priv->dev->phydev, - !!(status & UMAC_IRQ_LINK_UP)); + if (status & UMAC_IRQ_LINK_EVENT) { + priv->dev->phydev->link = !!(status & UMAC_IRQ_LINK_UP); + phy_mac_interrupt(priv->dev->phydev); + } } /* bcmgenet_isr1: handle Rx and Tx priority queues */
--
2.15.1