Re: [PATCH net-next 2/2 v9] net: ethernet: Add a driver for Gemini gigabit ethernet

On Mon, Dec 18, 2017 at 03:48:17PM +0100, Michał Mirosław wrote:

On Mon, Dec 18, 2017 at 02:57:37PM +0100, Linus Walleij wrote:

quoted

On Sat, Dec 16, 2017 at 8:39 PM, Linus Walleij [off-list ref] wrote:

quoted

The Gemini ethernet has been around for years as an out-of-tree
patch used with the NAS boxen and routers built on StorLink
SL3512 and SL3516, later Storm Semiconductor, later Cortina
Systems. These ASICs are still being deployed and brand new
off-the-shelf systems using it can easily be acquired.

[...]

quoted

quoted

---
Changes from v8:
- Remove dependency guards in Kconfig to get a wider compile
  coverage for the driver to detect broken APIs etc.

I guess we need to hold this off for a while, the code does
some weird stuff using the ARM-internal page DMA mapping
API.

I *think* what happens is that the driver allocates a global queue
used for RX and TX on both interfaces, then initializes that with
page pointers and gives that to the hardware to play with.

When an RX packet comes in, the RX routine needs to figure
out from the DMA (physical) address which remapped
page/address this random physical address pointer
corresponds to.

The Linux DMA API assumption is that the driver keeps track
of this mapping, not the hardware. So we need to figure out
a way to reverse-map this. Preferably quickly, and without
using any ARM-internal mapping APIs.

IIRC, the hardware copies descriptors from free queue (FREEQ)
to RX queues. FREEQ is shared among the two ethernet ports.

This platform is CPU bound, so every additional lookup will
hit performance here. In my version I had an #ifdef for
COMPILE_TEST that replaced ARM-specific calls with stubs.
Since the driver is not expected to work on other platforms,
this seemed like the best workaround to make it compile
on other arches.

Really.  No.  Stop going beneath the covers and using ARM private
implementation APIs in drivers.

Take that as a big NAK to that.

(I don't seem have the patch in question here to look at though.)

-- 
RMK's Patch system: http://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to speedtest.net: 8.21Mbps down 510kbps up