[PATCH V2 net-next 13/17] net: hns3: add support to update flow control settings after autoneg
flat view
STALE3230d
SUPERSEDED
From: Lipeng <hidden>
Date: 2017-12-19 03:32:58
Also in:
lkml
Subsystem:
hisilicon network subsystem 3 driver (hns3), hisilicon network subsystem driver, networking drivers, the rest · Maintainers:
Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v2 of 5 in this series.
Revisions (5)
When auto-negotiation is enabled, the MAC flow control settings is based on the flow control negotiation result. And it should be configured after a valid link has been established. This patch adds support to update flow control settings after auto-negotiation has completed. Signed-off-by: Fuyun Liang <redacted> Signed-off-by: Lipeng <redacted> --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 36 ++++++++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 1 + .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 4 +++ 3 files changed, 41 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index fbe5dee..f5465a8 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c@@ -4707,6 +4707,42 @@ static int hclge_cfg_pauseparam(struct hclge_dev *hdev, u32 rx_en, u32 tx_en) return 0; } +int hclge_cfg_flowctrl(struct hclge_dev *hdev) +{ + struct phy_device *phydev = hdev->hw.mac.phydev; + u16 local_advertising = 0; + u16 remote_advertising = 0; + u32 rx_pause, tx_pause; + u8 flowctl; + + if (!phydev->link || !phydev->autoneg) + return 0; + + if (phydev->advertising & ADVERTISED_Pause) + local_advertising = ADVERTISE_PAUSE_CAP; + + if (phydev->advertising & ADVERTISED_Asym_Pause) + local_advertising |= ADVERTISE_PAUSE_ASYM; + + if (phydev->pause) + remote_advertising = LPA_PAUSE_CAP; + + if (phydev->asym_pause) + remote_advertising |= LPA_PAUSE_ASYM; + + flowctl = mii_resolve_flowctrl_fdx(local_advertising, + remote_advertising); + tx_pause = flowctl & FLOW_CTRL_TX; + rx_pause = flowctl & FLOW_CTRL_RX; + + if (phydev->duplex == HCLGE_MAC_HALF) { + tx_pause = 0; + rx_pause = 0; + } + + return hclge_cfg_pauseparam(hdev, rx_pause, tx_pause); +} + static void hclge_get_pauseparam(struct hnae3_handle *handle, u32 *auto_neg, u32 *rx_en, u32 *tx_en) {
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
index cda520c..28cc063 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h@@ -602,4 +602,5 @@ int hclge_set_vf_vlan_common(struct hclge_dev *vport, int vfid, void hclge_mbx_handler(struct hclge_dev *hdev); void hclge_reset_tqp(struct hnae3_handle *handle, u16 queue_id); +int hclge_cfg_flowctrl(struct hclge_dev *hdev); #endif
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
index 7069e94..3745153 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c@@ -183,6 +183,10 @@ static void hclge_mac_adjust_link(struct net_device *netdev) ret = hclge_cfg_mac_speed_dup(hdev, speed, duplex); if (ret) netdev_err(netdev, "failed to adjust link.\n"); + + ret = hclge_cfg_flowctrl(hdev); + if (ret) + netdev_err(netdev, "failed to configure flow control.\n"); } int hclge_mac_start_phy(struct hclge_dev *hdev)
--
1.9.1