[PATCH v4 net-next 4/8] net: hns3: Add HNS3 VF driver to kernel build framework
flat view
STALE3229d
From: Salil Mehta <hidden>
Date: 2017-12-14 18:04:20
Also in:
linux-rdma, lkml
Subsystem:
hisilicon network subsystem 3 driver (hns3), hisilicon network subsystem driver, networking drivers, the rest · Maintainers:
Jian Shen, Jijie Shao, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v4 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 [diff vs current]
- v4 current
This patch introduces the new Makefiles and updates existing Makefiles required to build the HNS3 Virtual Function driver. This also updates the Kconfig for introduction of new menuconfig entries related to VF driver. Signed-off-by: Salil Mehta <redacted> Signed-off-by: lipeng <redacted> --- drivers/net/ethernet/hisilicon/Kconfig | 28 +++++++++++++++------- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ .../net/ethernet/hisilicon/hns3/hns3vf/Makefile | 9 +++++++ 3 files changed, 30 insertions(+), 9 deletions(-) create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 30000b6..8bcf470 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig@@ -94,15 +94,6 @@ config HNS3_HCLGE compatibility layer. The engine would be used in Hisilicon hip08 family of SoCs and further upcoming SoCs. -config HNS3_ENET - tristate "Hisilicon HNS3 Ethernet Device Support" - depends on 64BIT && PCI - depends on HNS3 && HNS3_HCLGE - ---help--- - This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08 - family of SoCs. This module depends upon HNAE3 driver to access the HNAE3 - devices and their associated operations. - config HNS3_DCB bool "Hisilicon HNS3 Data Center Bridge Support" default n
@@ -112,4 +103,23 @@ config HNS3_DCB If unsure, say N. +config HNS3_HCLGEVF + tristate "Hisilicon HNS3VF Acceleration Engine & Compatibility Layer Support" + depends on PCI_MSI + depends on HNS3 + depends on HNS3_HCLGE + ---help--- + This selects the HNS3 VF drivers network acceleration engine & its hardware + compatibility layer. The engine would be used in Hisilicon hip08 family of + SoCs and further upcoming SoCs. + +config HNS3_ENET + tristate "Hisilicon HNS3 Ethernet Device Support" + depends on 64BIT && PCI + depends on HNS3 + ---help--- + This selects the Ethernet Driver for Hisilicon Network Subsystem 3 for hip08 + family of SoCs. This module depends upon HNAE3 driver to access the HNAE3 + devices and their associated operations. + endif # NET_VENDOR_HISILICON
diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile
index a9349e1..c450945 100644
--- a/drivers/net/ethernet/hisilicon/hns3/Makefile
+++ b/drivers/net/ethernet/hisilicon/hns3/Makefile@@ -1,7 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ # # Makefile for the HISILICON network device drivers. # obj-$(CONFIG_HNS3) += hns3pf/ +obj-$(CONFIG_HNS3) += hns3vf/ obj-$(CONFIG_HNS3) += hnae3.o
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile
new file mode 100644
index 0000000..fb93bbd
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/Makefile@@ -0,0 +1,9 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Makefile for the HISILICON network device drivers. +# + +ccflags-y := -Idrivers/net/ethernet/hisilicon/hns3 + +obj-$(CONFIG_HNS3_HCLGEVF) += hclgevf.o +hclgevf-objs = hclgevf_main.o hclgevf_cmd.o hclgevf_mbx.o
\ No newline at end of file -- 2.7.4