[PATCH net-next v4 3/4] net: phy: smsc: LAN8710/20: add PHY_RST_AFTER_CLK_EN flag
flat view
STALE3235d
SUPERSEDED: 8 (8M)
From: Richard Leitner <hidden>
Date: 2017-12-07 14:47:20
Also in:
linux-devicetree, lkml
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Revision v4 of 3 in this series; 1 review trailer (1 from subsystem maintainers).
Revisions (3)
- v3 [diff vs current]
- v4 current
- v5 [diff vs current]
From: Richard Leitner <richard.leitner@skidata.com> The Microchip/SMSC LAN8710/LAN8720 PHYs need (according to their datasheet [1]) a continuous REF_CLK when configured to "REF_CLK In Mode". Therefore set the PHY_RST_AFTER_CLK_EN flag for those PHYs to let the ETH driver reset them after the REF_CLK is enabled. [1] http://ww1.microchip.com/downloads/en/DeviceDoc/00002165B.pdf Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/phy/smsc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index a1961ba87e2b..be399d645224 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c@@ -312,7 +312,7 @@ static struct phy_driver smsc_phy_driver[] = { .name = "SMSC LAN8710/LAN8720", .features = PHY_BASIC_FEATURES, - .flags = PHY_HAS_INTERRUPT, + .flags = PHY_HAS_INTERRUPT | PHY_RST_AFTER_CLK_EN, .probe = smsc_phy_probe,
--
2.11.0