Re: [PATCH/RFC v2] leds: trigger: Introduce a NETDEV trigger

Hi Jacek,

On 5 December 2017 at 20:38, Jacek Anaszewski
[off-list ref] wrote:

Hi Ben,

On 12/05/2017 12:19 PM, Ben Whitten wrote:

quoted

From: Ben Whitten <redacted>

The patch was converted to led_blink_oneshot, in doing so we find that the
behaviour has changed. As I dont want to break 'userspace' led behaviour this
patch shouldn't be merged as is. Open to suggestions.

Given an interval of 50ms and heavy throughput, the previous implementation
produced a blink with 100ms period and 50% dutycycle. The led_blink_oneshot
version produces a blink with 140ms period and 57% dutycycle.

Please check if the LED class driver you're testing the trigger with
implements blink_set op. If yes it would be good to check if it doesn't
align the delay intervals to the hardware capabilities instead of
failing and relying on a LED core software blink fallback.

The led are using gpio-led set from device tree on an embedded system, sama5
based. So as far as I can tell blink_op is NULL in this case and it
then relies on
software for the blink in the form of timers.
I assume its the jiffies playing a part here, taking a jiffy or two to
queue up a flash
may add 10ms to the desired 50ms delay_on/delay_off that I am seeing. Then the
extra time may be due to the stats workqueue not aligning with the
blink timer to
kick it off again.

Best regards,
Ben