On Tue, 26 Dec 2017 12:25:12 -0500 (EST)
David Miller [off-list ref] wrote:

From: Stephen Hemminger <stephen@networkplumber.org>
Date: Wed, 20 Dec 2017 14:33:23 -0800

quoted

Since commit 6123c66854c1 ("netvsc: delay setup of VF device")
the automatic bring up of the VF is delayed to allow userspace (udev)
a chance to rename the device. This delay is problematic because
it delays boot and may not be long enough for some cases.

Instead, use the rename can be used to trigger the next step
in setup to happen immediately.

The VF initialization sequence now looks like:
   * hotplug causes VF network device probe to create network device
   * netvsc notifier joins VF with netvsc and schedules VF to be
     setup after timer expires
   * udev in userspace renames device
   * if netvsc notifier detects rename, it can cancel timer
     and do immediate setup

The delay can also be increased to allow for slower rules.
Still need the delayed work to handle the case where rename is
not done.

Signed-off-by: Stephen Hemminger <redacted>  

I'm still seriously perplexed by this whole situation.

See state diagram below
 

Why can't you bring up a VF interface simply because of a text string
used to reffered to it?

VF network device can not have its name changed if up.
The network device kernel API does not allow name change of network
device that is up.  There was a patch from Vitaly to allow this, but it
was deemed to be too risky.

   https://patchwork.ozlabs.org/patch/799646/

If the VF interface were named "rabbit" I don't see why it can't be
brought up until it is named "tiger"

I'm not applying any patches in this area until we have a better
understanding of what the real issue is, and have a real solution
that can be applied to any other VF interface implemented in the
tree.

                       Netvsc                  VF Network
                       Device                  Device

                         |                       |
                         |                       |
udev network daemon      |                       +<------------- PCI hotplug
                         |    NETDEV_REGISTER    |
     +                   +<----------------------+ register_netdev
     |                                           |
     |                   |                       |
     |                   +---------------------->+
     |                   |  netdev_rx_handler    |
     |                   |                       |
     |                   +---------------------> |
     |                   | netdev_upper_dev_link |
     +<------------------+                       |
     |  udev device add  |                       |
     |                   |                       |
     |                   |                       |
     |                   |                       |
     +-------------------+---------------------> |
     |     rename eth1 to enp12s0                |
     |                   |     NETDEV_CHANGENAME |
     |                   <-----------------------+
     |                   |                       |
     |                   |                       |
     |                   +---------------------> |
     |                   |   dev_set_mtu         |
     |                   |                       |
     |                   +---------------------> |
     |                   |   dev_open            |
     |                   |                       |
     |                   |    NETDEV_UP          |
     |                   <-----------------------+
     v                   |                       |
                         |                       |
                         |                       |
                         +----------------------------------> Hyper-V host
                         |        RNDIS switch datapath
                         |                       |
                         v                       v