[PATCH net-next 2/5] net: phy: realtek: rename RTL821x_INER_INIT to RTL8211B_INER_INIT
flat view
STALE3247d
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Date: 2017-12-02 21:51:47
Also in:
linux-amlogic
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
This macro is only used by the RTL8211B code. RTL8211E and RTL8211F both use other bits to initialize the RTL821x_INER register. No functional changes. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> --- drivers/net/phy/realtek.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 9708aa9c58dd..59f0688e4d28 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c@@ -21,7 +21,7 @@ #define RTL821x_PHYSR_DUPLEX BIT(13) #define RTL821x_PHYSR_SPEED GENMASK(15, 14) #define RTL821x_INER 0x12 -#define RTL821x_INER_INIT 0x6400 +#define RTL8211B_INER_INIT 0x6400 #define RTL821x_INSR 0x13 #define RTL821x_PAGE_SELECT 0x1f #define RTL8211E_INER_LINK_STATUS BIT(10)
@@ -92,7 +92,7 @@ static int rtl8211b_config_intr(struct phy_device *phydev) if (phydev->interrupts == PHY_INTERRUPT_ENABLED) err = phy_write(phydev, RTL821x_INER, - RTL821x_INER_INIT); + RTL8211B_INER_INIT); else err = phy_write(phydev, RTL821x_INER, 0);
--
2.15.1