Thread (5 messages) 5 messages, 2 authors, 2017-12-03

[PATCH net 3/3] s390/qeth: build max size GSO skbs on L2 devices

flat view
STALE3239d

From: Julian Wiedmann <hidden>
Date: 2017-12-01 09:15:09
Also in: linux-s390
Subsystem: networking drivers, s390 architecture, s390 network drivers, the rest · Maintainers: Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Heiko Carstens, Vasily Gorbik, Alexander Gordeev, Alexandra Winter, Aswin Karuvally, Linus Torvalds

The current GSO skb size limit was copy&pasted over from the L3 path,
where it is needed due to a TSO limitation.
As L2 devices don't offer TSO support (and thus all GSO skbs are
segmented before they reach the driver), there's no reason to restrict
the stack in how large it may build the GSO skbs.

Fixes: d52aec97e5bc ("qeth: enable scatter/gather in layer 2 mode")
Signed-off-by: Julian Wiedmann <redacted>
---
 drivers/s390/net/qeth_l2_main.c | 2 --
 drivers/s390/net/qeth_l3_main.c | 4 ++--
 2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 85162712d207..f21c94810373 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -1030,8 +1030,6 @@ static int qeth_l2_setup_netdev(struct qeth_card *card)
 
 	card->info.broadcast_capable = 1;
 	qeth_l2_request_initial_mac(card);
-	card->dev->gso_max_size = (QETH_MAX_BUFFER_ELEMENTS(card) - 1) *
-				  PAGE_SIZE;
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT);
 	netif_carrier_off(card->dev);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 46a841258fc8..2a25f20566d8 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2987,8 +2987,8 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
 				NETIF_F_HW_VLAN_CTAG_RX |
 				NETIF_F_HW_VLAN_CTAG_FILTER;
 	netif_keep_dst(card->dev);
-	card->dev->gso_max_size = (QETH_MAX_BUFFER_ELEMENTS(card) - 1) *
-				  PAGE_SIZE;
+	netif_set_gso_max_size(card->dev, (QETH_MAX_BUFFER_ELEMENTS(card) - 1) *
+					  PAGE_SIZE);
 
 	SET_NETDEV_DEV(card->dev, &card->gdev->dev);
 	netif_napi_add(card->dev, &card->napi, qeth_poll, QETH_NAPI_WEIGHT);
-- 
2.13.5
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help