On Wed, Nov 01, 2017 at 06:09:17PM -0700, Florian Fainelli wrote:

On 11/01/2017 05:36 PM, David Daney wrote:

quoted

From: Carlos Munoz <cmunoz-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>

Add bindings for Common Ethernet Interface (BGX) block.

Signed-off-by: Carlos Munoz <cmunoz-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
Signed-off-by: Steven J. Hill <Steven.Hill-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
Signed-off-by: David Daney <david.daney-YGCgFSpz5w/QT0dZR+AlfA@public.gmane.org>
---

[snip]

quoted

+Properties:
+
+- compatible: "cavium,octeon-7360-xcv": Compatibility with cn73xx SOCs.
+
+- reg: The index of the interface within the BGX block.
+
+- local-mac-address: Mac address for the interface.
+
+- phy-handle: phandle to the phy node connected to the interface.
+
+- cavium,rx-clk-delay-bypass: Set to <1> to bypass the rx clock delay setting.
+  Needed by the Micrel PHY.

Is not that implied by an appropriate "phy-mode" property already?

Hi Florian

Looking at the driver patch, phy-mode is not used at
all. of_phy_connect() passes a hard coded SGMII value!

David, you need to fix this.

       Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html