[PATCH v3 net-next 2/6] net: dsa: {e}dsa: set offload_fwd_mark on received packets

The software bridge needs to know if a packet has already been bridged
by hardware offload to ports in the same hardware offload, in order
that it does not re-flood them, causing duplicates. This is
particularly true for broadcast and multicast traffic which the host
has requested.

By setting offload_fwd_mark in the skb the bridge will only flood to
ports in other offloads and other netifs. Set this flag in the DSA and
EDSA tag driver.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---

v2
--
For the moment, do this in the tag drivers, not the generic code.
Once we get more test results from other switches, maybe move it back
again.
---
 net/dsa/tag_dsa.c  | 2 ++
 net/dsa/tag_edsa.c | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/net/dsa/tag_dsa.c b/net/dsa/tag_dsa.c
index dbbcdafed8c3..cd13cfc542ce 100644
--- a/net/dsa/tag_dsa.c
+++ b/net/dsa/tag_dsa.c

@@ -141,6 +141,8 @@ static struct sk_buff *dsa_rcv(struct sk_buff *skb, struct net_device *dev,
 			2 * ETH_ALEN);
 	}
 
+	skb->offload_fwd_mark = 1;
+
 	return skb;
 }
 

diff --git a/net/dsa/tag_edsa.c b/net/dsa/tag_edsa.c
index f38a626b3a05..4083326b806e 100644
--- a/net/dsa/tag_edsa.c
+++ b/net/dsa/tag_edsa.c

@@ -160,6 +160,8 @@ static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev,
 			2 * ETH_ALEN);
 	}
 
+	skb->offload_fwd_mark = 1;
+
 	return skb;
 }
 

-- 
2.15.0