[PATCH net-next 07/14] bnxt_en: Check maximum supported MTU from firmware.
From: Michael Chan <michael.chan@broadcom.com>
Date: 2017-10-26 15:51:54
Subsystem:
broadcom bnxt_en 50 gigabit ethernet driver, networking drivers, the rest · Maintainers:
Michael Chan, Pavan Chebbi, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Some NICs have a firmware enforced maximum MTU setting by management firmware. Set up netdev->max_mtu accordingly. Signed-off-by: Michael Chan <michael.chan@broadcom.com> --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 17 +++++++++++------ drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 + 2 files changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index ef5a5e5..285863b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c@@ -2835,7 +2835,8 @@ int bnxt_set_rx_skb_mode(struct bnxt *bp, bool page_mode) if (page_mode) { if (bp->dev->mtu > BNXT_MAX_PAGE_MODE_MTU) return -EOPNOTSUPP; - bp->dev->max_mtu = BNXT_MAX_PAGE_MODE_MTU; + bp->dev->max_mtu = + min_t(u16, bp->max_mtu, BNXT_MAX_PAGE_MODE_MTU); bp->flags &= ~BNXT_FLAG_AGG_RINGS; bp->flags |= BNXT_FLAG_NO_AGG_RINGS | BNXT_FLAG_RX_PAGE_MODE; bp->dev->hw_features &= ~NETIF_F_LRO;
@@ -2843,7 +2844,7 @@ int bnxt_set_rx_skb_mode(struct bnxt *bp, bool page_mode) bp->rx_dir = DMA_BIDIRECTIONAL; bp->rx_skb_func = bnxt_rx_page_skb; } else { - bp->dev->max_mtu = BNXT_MAX_MTU; + bp->dev->max_mtu = bp->max_mtu; bp->flags &= ~BNXT_FLAG_RX_PAGE_MODE; bp->rx_dir = DMA_FROM_DEVICE; bp->rx_skb_func = bnxt_rx_skb;
@@ -4732,6 +4733,10 @@ static int bnxt_hwrm_func_qcfg(struct bnxt *bp) else bp->br_mode = BRIDGE_MODE_UNDEF; + bp->max_mtu = le16_to_cpu(resp->max_mtu_configured); + if (!bp->max_mtu) + bp->max_mtu = BNXT_MAX_MTU; + func_qcfg_exit: mutex_unlock(&bp->hwrm_cmd_lock); return rc;
@@ -8095,10 +8100,6 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) dev->features |= dev->hw_features | NETIF_F_HIGHDMA; dev->priv_flags |= IFF_UNICAST_FLT; - /* MTU range: 60 - 9500 */ - dev->min_mtu = ETH_ZLEN; - dev->max_mtu = BNXT_MAX_MTU; - #ifdef CONFIG_BNXT_SRIOV init_waitqueue_head(&bp->sriov_cfg_wait); mutex_init(&bp->sriov_lock);
@@ -8146,6 +8147,10 @@ static int bnxt_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) bnxt_ethtool_init(bp); bnxt_dcb_init(bp); + /* MTU range: 60 - FW defined max */ + dev->min_mtu = ETH_ZLEN; + dev->max_mtu = bp->max_mtu; + rc = bnxt_probe_phy(bp); if (rc) goto init_err_pci_clean;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index d193923..5f1fce4 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h@@ -1172,6 +1172,7 @@ struct bnxt { int nr_vnics; u32 rss_hash_cfg; + u16 max_mtu; u8 max_tc; u8 max_lltc; /* lossless TCs */ struct bnxt_queue_info q_info[BNXT_MAX_QUEUE];
--
1.8.3.1