[PATCH RFC 2/5] Add KSZ8795 switch driver support in Makefile
Subsystems:
microchip ksz series ethernet switch driver, networking drivers, networking [dsa], the rest
STALE3286d
5 messages,
3 authors,
2017-09-08 · open the first message on its own page
From: Tristram Ha <redacted>
Add KSZ8795 switch support with SPI access.
Signed-off-by: Tristram Ha <redacted>
---
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 0961c30..0d8ba48 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,4 @@
obj-$(CONFIG_MICROCHIP_KSZ) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ_SPI_DRIVER) += ksz_spi.o
+obj-$(CONFIG_MICROCHIP_KSZ8795) += ksz8795.o ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ8795_SPI_DRIVER) += ksz8795_spi.o
On Thu, Sep 07, 2017 at 09:17:10PM +0000, Tristram.Ha@microchip.com wrote:
quoted hunk
From: Tristram Ha <redacted>
Add KSZ8795 switch support with SPI access.
Signed-off-by: Tristram Ha <redacted>
---
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 0961c30..0d8ba48 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,4 @@
obj-$(CONFIG_MICROCHIP_KSZ) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ_SPI_DRIVER) += ksz_spi.o
+obj-$(CONFIG_MICROCHIP_KSZ8795) += ksz8795.o ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ8795_SPI_DRIVER) += ksz8795_spi.o
I've not tried it, but i think this breaks the build
Andrew
-----Original Message-----
From: Andrew Lunn [mailto:andrew@lunn.ch]
Sent: Thursday, September 07, 2017 2:56 PM
To: Tristram Ha - C24268
Cc: muvarov@gmail.com; pavel@ucw.cz; nathan.leigh.conrad@gmail.com;
vivien.didelot@savoirfairelinux.com; f.fainelli@gmail.com;
netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Woojung Huh - C21699
Subject: Re: [PATCH RFC 2/5] Add KSZ8795 switch driver support in Makefile
On Thu, Sep 07, 2017 at 09:17:10PM +0000, Tristram.Ha@microchip.com wrote:
quoted
From: Tristram Ha <redacted>
Add KSZ8795 switch support with SPI access.
Signed-off-by: Tristram Ha <redacted>
---
diff --git a/drivers/net/dsa/microchip/Makefile
b/drivers/net/dsa/microchip/Makefile
quoted
index 0961c30..0d8ba48 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,4 @@
obj-$(CONFIG_MICROCHIP_KSZ) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ_SPI_DRIVER) += ksz_spi.o
+obj-$(CONFIG_MICROCHIP_KSZ8795) += ksz8795.o ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ8795_SPI_DRIVER) += ksz8795_spi.o
I've not tried it, but i think this breaks the build
Andrew
So you would like to have all 5 patches in 1 patch file?
On Thu, Sep 07, 2017 at 10:29:34PM +0000, Tristram.Ha@microchip.com wrote:
quoted
-----Original Message-----
From: Andrew Lunn [mailto:andrew@lunn.ch]
Sent: Thursday, September 07, 2017 2:56 PM
To: Tristram Ha - C24268
Cc: muvarov@gmail.com; pavel@ucw.cz; nathan.leigh.conrad@gmail.com;
vivien.didelot@savoirfairelinux.com; f.fainelli@gmail.com;
netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Woojung Huh - C21699
Subject: Re: [PATCH RFC 2/5] Add KSZ8795 switch driver support in Makefile
On Thu, Sep 07, 2017 at 09:17:10PM +0000, Tristram.Ha@microchip.com wrote:
quoted
From: Tristram Ha <redacted>
Add KSZ8795 switch support with SPI access.
Signed-off-by: Tristram Ha <redacted>
---
diff --git a/drivers/net/dsa/microchip/Makefile
b/drivers/net/dsa/microchip/Makefile
quoted
index 0961c30..0d8ba48 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,4 @@
obj-$(CONFIG_MICROCHIP_KSZ) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ_SPI_DRIVER) += ksz_spi.o
+obj-$(CONFIG_MICROCHIP_KSZ8795) += ksz8795.o ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ8795_SPI_DRIVER) += ksz8795_spi.o
I've not tried it, but i think this breaks the build
Andrew
So you would like to have all 5 patches in 1 patch file?
Or maybe this one last? Would that stop the build from breaking?
Andrew
On Fri 2017-09-08 00:43:09, Andrew Lunn wrote:
On Thu, Sep 07, 2017 at 10:29:34PM +0000, Tristram.Ha@microchip.com wrote:
quoted
quoted
-----Original Message-----
From: Andrew Lunn [mailto:andrew@lunn.ch]
Sent: Thursday, September 07, 2017 2:56 PM
To: Tristram Ha - C24268
Cc: muvarov@gmail.com; pavel@ucw.cz; nathan.leigh.conrad@gmail.com;
vivien.didelot@savoirfairelinux.com; f.fainelli@gmail.com;
netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Woojung Huh - C21699
Subject: Re: [PATCH RFC 2/5] Add KSZ8795 switch driver support in Makefile
On Thu, Sep 07, 2017 at 09:17:10PM +0000, Tristram.Ha@microchip.com wrote:
quoted
From: Tristram Ha <redacted>
Add KSZ8795 switch support with SPI access.
Signed-off-by: Tristram Ha <redacted>
---
diff --git a/drivers/net/dsa/microchip/Makefile
b/drivers/net/dsa/microchip/Makefile
quoted
index 0961c30..0d8ba48 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,2 +1,4 @@
obj-$(CONFIG_MICROCHIP_KSZ) += ksz9477.o ksz_common.o
obj-$(CONFIG_MICROCHIP_KSZ_SPI_DRIVER) += ksz_spi.o
+obj-$(CONFIG_MICROCHIP_KSZ8795) += ksz8795.o ksz_common.o
+obj-$(CONFIG_MICROCHIP_KSZ8795_SPI_DRIVER) += ksz8795_spi.o
I've not tried it, but i think this breaks the build
Andrew
So you would like to have all 5 patches in 1 patch file?
Or maybe this one last? Would that stop the build from breaking?
This and Kconfig change should come together.. and probably last.
Pavel
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html