[patch net] net: dsa: mv88e6xxx: Allow dsa and cpu ports in multiple vlans
From: Andrew Lunn <andrew@lunn.ch>
Date: 2017-09-25 21:32:48
Subsystem:
marvell 88e6xxx ethernet switch fabric driver, networking drivers, networking [dsa], the rest · Maintainers:
Andrew Lunn, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
Ports with the same VLAN must all be in the same bridge. However the
CPU and DSA ports need to be in multiple VLANs spread over multiple
bridges. So exclude them when performing this test.
Fixes: b2f81d304cee ("net: dsa: add CPU and DSA ports as VLAN members")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
drivers/net/dsa/mv88e6xxx/chip.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index c6678aa9b4ef..674dab71d71c 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c@@ -1100,6 +1100,10 @@ static int mv88e6xxx_port_check_hw_vlan(struct dsa_switch *ds, int port, }; int i, err; + /* DSA and CPU ports have to be members of multiple vlans */ + if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port)) + return 0; + if (!vid_begin) return -EOPNOTSUPP;
--
2.14.1