[patch net-next 06/13] mlxsw: reg: Add The Router TCAM Allocation register
From: Jiri Pirko <jiri@resnulli.us>
Date: 2017-09-19 08:00:29
Subsystem:
mellanox ethernet switch drivers, networking drivers, the rest · Maintainers:
Ido Schimmel, Petr Machata, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Yotam Gigi <redacted> This register is used for allocation of regions in the TCAM table and it will be used by the multicast router offloading logic. Signed-off-by: Yotam Gigi <redacted> Reviewed-by: Ido Schimmel <redacted> Signed-off-by: Jiri Pirko <redacted> --- drivers/net/ethernet/mellanox/mlxsw/reg.h | 52 +++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
index fb8ab44..e9f37ea 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/reg.h
+++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h@@ -4310,6 +4310,57 @@ mlxsw_reg_ritr_loopback_ipip4_pack(char *payload, mlxsw_reg_ritr_loopback_ipip_usip4_set(payload, usip); } +/* RTAR - Router TCAM Allocation Register + * -------------------------------------- + * This register is used for allocation of regions in the TCAM table. + */ +#define MLXSW_REG_RTAR_ID 0x8004 +#define MLXSW_REG_RTAR_LEN 0x20 + +MLXSW_REG_DEFINE(rtar, MLXSW_REG_RTAR_ID, MLXSW_REG_RTAR_LEN); + +enum mlxsw_reg_rtar_op { + MLXSW_REG_RTAR_OP_ALLOCATE, + MLXSW_REG_RTAR_OP_RESIZE, + MLXSW_REG_RTAR_OP_DEALLOCATE, +}; + +/* reg_rtar_op + * Access: WO + */ +MLXSW_ITEM32(reg, rtar, op, 0x00, 28, 4); + +enum mlxsw_reg_rtar_key_type { + MLXSW_REG_RTAR_KEY_TYPE_IPV4_MULTICAST = 1, + MLXSW_REG_RTAR_KEY_TYPE_IPV6_MULTICAST = 3 +}; + +/* reg_rtar_key_type + * TCAM key type for the region. + * Access: WO + */ +MLXSW_ITEM32(reg, rtar, key_type, 0x00, 0, 8); + +/* reg_rtar_region_size + * TCAM region size. When allocating/resizing this is the requested + * size, the response is the actual size. + * Note: Actual size may be larger than requested. + * Reserved for op = Deallocate + * Access: WO + */ +MLXSW_ITEM32(reg, rtar, region_size, 0x04, 0, 16); + +static inline void mlxsw_reg_rtar_pack(char *payload, + enum mlxsw_reg_rtar_op op, + enum mlxsw_reg_rtar_key_type key_type, + u16 region_size) +{ + MLXSW_REG_ZERO(rtar, payload); + mlxsw_reg_rtar_op_set(payload, op); + mlxsw_reg_rtar_key_type_set(payload, key_type); + mlxsw_reg_rtar_region_size_set(payload, region_size); +} + /* RATR - Router Adjacency Table Register * -------------------------------------- * The RATR register is used to configure the Router Adjacency (next-hop)
@@ -6855,6 +6906,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(hpkt), MLXSW_REG(rgcr), MLXSW_REG(ritr), + MLXSW_REG(rtar), MLXSW_REG(ratr), MLXSW_REG(rtdp), MLXSW_REG(ricnt),
--
2.9.5