[patch net] mlxsw: spectrum: Fix EEPROM access in case of SFP/SFP+
From: Jiri Pirko <jiri@resnulli.us>
Date: 2017-09-11 07:42:30
Subsystem:
mellanox ethernet switch drivers, networking drivers, the rest · Maintainers:
Ido Schimmel, Petr Machata, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Arkadi Sharshevsky <redacted>
The current code does not handle correctly the access to the upper page
in case of SFP/SFP+ EEPROM. In that case the offset should be local
and the I2C address should be changed.
Fixes: 2ea109039cd3 ("mlxsw: spectrum: Add support for access cable info via ethtool")
Reported-by: Florian Klink <redacted>
Signed-off-by: Arkadi Sharshevsky <redacted>
Reviewed-by: Ido Schimmel <redacted>
Signed-off-by: Jiri Pirko <redacted>
---
Dave, could you please queue this up to STABLE as well? Thanks!
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index ed7cd6c..e080459 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c@@ -2545,7 +2545,9 @@ static int mlxsw_sp_flash_device(struct net_device *dev, return err; } -#define MLXSW_SP_QSFP_I2C_ADDR 0x50 +#define MLXSW_SP_I2C_ADDR_LOW 0x50 +#define MLXSW_SP_I2C_ADDR_HIGH 0x51 +#define MLXSW_SP_EEPROM_PAGE_LENGTH 256 static int mlxsw_sp_query_module_eeprom(struct mlxsw_sp_port *mlxsw_sp_port, u16 offset, u16 size, void *data,
@@ -2554,12 +2556,25 @@ static int mlxsw_sp_query_module_eeprom(struct mlxsw_sp_port *mlxsw_sp_port, struct mlxsw_sp *mlxsw_sp = mlxsw_sp_port->mlxsw_sp; char eeprom_tmp[MLXSW_SP_REG_MCIA_EEPROM_SIZE]; char mcia_pl[MLXSW_REG_MCIA_LEN]; + u16 i2c_addr; int status; int err; size = min_t(u16, size, MLXSW_SP_REG_MCIA_EEPROM_SIZE); + + if (offset < MLXSW_SP_EEPROM_PAGE_LENGTH && + offset + size > MLXSW_SP_EEPROM_PAGE_LENGTH) + /* Cross pages read, read until offset 256 in low page */ + size = MLXSW_SP_EEPROM_PAGE_LENGTH - offset; + + i2c_addr = MLXSW_SP_I2C_ADDR_LOW; + if (offset >= MLXSW_SP_EEPROM_PAGE_LENGTH) { + i2c_addr = MLXSW_SP_I2C_ADDR_HIGH; + offset -= MLXSW_SP_EEPROM_PAGE_LENGTH; + } + mlxsw_reg_mcia_pack(mcia_pl, mlxsw_sp_port->mapping.module, - 0, 0, offset, size, MLXSW_SP_QSFP_I2C_ADDR); + 0, 0, offset, size, i2c_addr); err = mlxsw_reg_query(mlxsw_sp->core, MLXSW_REG(mcia), mcia_pl); if (err)
--
2.9.3