[PATCH net-next v2 10/10] arm64: dts: marvell: mcbin: enable more networking ports
flat view
STALE3341d
REVIEWED: 1 (0M)
From: Antoine Tenart <hidden>
Date: 2017-08-22 17:08:30
Also in:
linux-arm-kernel
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, marvell macchiatobin support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Russell King, Linus Torvalds
1 review trailer.
This patch enables the two GE/SFP ports. They are configured in 10GKR mode by default. To do this the cpm_xdmio is enabled as well, and two phy descriptions are added. Signed-off-by: Antoine Tenart <redacted> Tested-by: Marcin Wojtas <redacted> --- arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 30 +++++++++++++++++++++++ 1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
index abd39d1c1739..6cb4b000e1ac 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts@@ -127,6 +127,30 @@ }; }; +&cpm_xmdio { + status = "okay"; + + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + + phy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <8>; + }; +}; + +&cpm_ethernet { + status = "okay"; +}; + +&cpm_eth0 { + status = "okay"; + phy = <&phy0>; + phy-mode = "10gbase-kr"; +}; + &cpm_sata0 { /* CPM Lane 0 - U29 */ status = "okay";
@@ -154,6 +178,12 @@ status = "okay"; }; +&cps_eth0 { + status = "okay"; + phy = <&phy1>; + phy-mode = "10gbase-kr"; +}; + &cps_eth1 { /* CPS Lane 0 - J5 (Gigabit RJ45) */ status = "okay";
--
2.13.5