Re: [net-next PATCHv6 2/2] net: socionext: Add NetSec driver
From: Jassi Brar <hidden>
Date: 2017-08-31 06:33:06
Also in:
linux-arm-kernel, linux-devicetree
On Wed, Aug 30, 2017 at 10:47 PM, Andrew Lunn [off-list ref] wrote:
quoted
+static int netsec_mac_update_to_phy_state(struct netsec_priv *priv) +{ + struct phy_device *phydev = priv->ndev->phydev; + u32 value = 0; + + value = phydev->duplex ? NETSEC_GMAC_MCR_REG_FULL_DUPLEX_COMMON : + NETSEC_GMAC_MCR_REG_HALF_DUPLEX_COMMON; + + if (phydev->speed != SPEED_1000) + value |= NETSEC_MCR_PS; + + if ((priv->phy_interface != PHY_INTERFACE_MODE_GMII) && + (phydev->speed == SPEED_100)) + value |= NETSEC_GMAC_MCR_REG_FES; + + value |= NETSEC_GMAC_MCR_REG_CST | NETSEC_GMAC_MCR_REG_JE; + + if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII) + value |= NETSEC_GMAC_MCR_REG_IBN; + + if (netsec_mac_write(priv, GMAC_REG_MCR, value)) + return -ETIMEDOUT; + + priv->actual_link_speed = phydev->speed; + priv->actual_duplex = phydev->duplex; + netif_info(priv, drv, priv->ndev, "%s: %uMbps, duplex:%d\n", + __func__, phydev->speed, phydev->duplex);phy_print_status()quoted
+ mac = of_get_mac_address(pdev->dev.of_node); + if (mac) + ether_addr_copy(ndev->dev_addr, mac); + + if (!is_valid_ether_addr(ndev->dev_addr)) { + eth_hw_addr_random(ndev); + dev_warn(&pdev->dev, "No MAC address found, using random\n"); + }So the mac address is optional, unlike what the binding document says.quoted
+ priv->phy_np = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); + if (!priv->phy_np) { + netif_err(priv, probe, ndev, "missing phy in DT\n");It is the phy-handle which is missing, not the phy.quoted
+ + /* MTU range */ + ndev->min_mtu = ETH_MIN_MTU;No need to set this, it is the default. Otherwise, this looks good, in terms of phy and mdio.
Will fix these. Thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html