[PATCH v5 3/4] dt-bindings: can: m_can: Document new can transceiver binding
From: Franklin S Cooper Jr <hidden>
Date: 2017-08-18 20:23:11
Also in:
linux-can, linux-devicetree, lkml
Subsystem:
can network drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Marc Kleine-Budde, Vincent Mailhol, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add information regarding can-transceiver binding. This is especially important for MCAN since the IP allows CAN FD mode to run significantly faster than what most transceivers are capable of. Signed-off-by: Franklin S Cooper Jr <redacted> Acked-by: Rob Herring <robh@kernel.org> --- Remove @ symbol from can-transceiver example Documentation/devicetree/bindings/net/can/m_can.txt | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index 9e33177..0bdae2a 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt@@ -43,6 +43,11 @@ Required properties: Please refer to 2.4.1 Message RAM Configuration in Bosch M_CAN user manual for details. +Optional Subnode: +- can-transceiver : Can-transceiver subnode describing maximum speed + that can be used for CAN/CAN-FD modes. See + Documentation/devicetree/bindings/net/can/can-transceiver.txt + for details. Example: SoC dtsi: m_can1: can@020e8000 {
@@ -64,4 +69,8 @@ Board dts: pinctrl-names = "default"; pinctrl-0 = <&pinctrl_m_can1>; status = "enabled"; + + can-transceiver { + max-bitrate = <5000000>; + }; };
--
2.9.4.dirty