[PATCH] net: stmmac: socfgpa: Ensure emac bit set in sys manager for MII/GMII/SGMII.
flat view
STALE3352d
From: Stephan Gatzka <hidden>
Date: 2017-08-18 06:55:31
Also in:
lkml
Subsystem:
arm/socfpga dwmac glue layer, networking drivers, stmmac ethernet driver, the rest · Maintainers:
Maxime Chevallier, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
When using MII/GMII/SGMII in the Altera SoC, the phy needs to be wired through the FPGA. To ensure correct behavior, the appropriate bit in the System Manager FPGA Interface Group register needs to be set. Signed-off-by: Stephan Gatzka <redacted> --- drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 17d4bba..d7c231b 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c@@ -269,7 +269,10 @@ static int socfpga_dwmac_set_phy_mode(struct socfpga_dwmac *dwmac) ctrl &= ~(SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << reg_shift); ctrl |= val << reg_shift; - if (dwmac->f2h_ptp_ref_clk) { + if ((dwmac->f2h_ptp_ref_clk) || + (phymode == PHY_INTERFACE_MODE_MII) || + (phymode == PHY_INTERFACE_MODE_GMII) || + (phymode == PHY_INTERFACE_MODE_SGMII)) { ctrl |= SYSMGR_EMACGRP_CTRL_PTP_REF_CLK_MASK << (reg_shift / 2); regmap_read(sys_mgr_base_addr, SYSMGR_FPGAGRP_MODULE_REG, &module);
--
2.7.4