[RFC net-next 4/8] net: dsa: bcm_sf2: Configure IMP port TC2QOS mapping
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-08-31 00:26:58
Subsystem:
broadcom b53/sf2 ethernet switch driver, networking drivers, networking [dsa], the rest · Maintainers:
Florian Fainelli, Jonas Gorski, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Vladimir Oltean, Linus Torvalds
Even though TC2QOS mapping is for switch egress queues, we need to configure it correclty in order for the Broadcom tag ingress (CPU -> switch) queue selection to work correctly since there is a 1:1 mapping between switch egress queues and ingress queues. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/dsa/bcm_sf2.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index 3f1ad9d5d7c5..fc9f9f171e55 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c@@ -103,6 +103,7 @@ static void bcm_sf2_brcm_hdr_setup(struct bcm_sf2_priv *priv, int port) static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) { struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds); + unsigned int i; u32 reg, offset; if (priv->type == BCM7445_DEVICE_ID)
@@ -129,6 +130,14 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port) reg |= MII_DUMB_FWDG_EN; core_writel(priv, reg, CORE_SWITCH_CTRL); + /* Configure Traffic Class to QoS mapping, allow each priority to map + * to a different queue number + */ + reg = core_readl(priv, CORE_PORT_TC2_QOS_MAP_PORT(port)); + for (i = 0; i < 8; i++) + reg |= i << (PRT_TO_QID_SHIFT * i); + core_writel(priv, reg, CORE_PORT_TC2_QOS_MAP_PORT(port)); + bcm_sf2_brcm_hdr_setup(priv, port); /* Force link status for IMP port */
--
1.9.1