[net-next 01/15] i40e: Update state variable for adminq subtask
flat view
From: Jeff Kirsher <hidden>
Date: 2017-08-28 00:16:18
Subsystem:
intel ethernet drivers, networking drivers, the rest · Maintainers:
Tony Nguyen, Przemek Kitszel, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
From: Sudheer Mogilappagari <redacted> During NVM update, state machine gets into unrecoverable state because i40e_clean_adminq_subtask can get scheduled after the admin queue command but before other state variables are updated. This causes incorrect input to i40e_nvmupd_check_wait_event and state transitions don't happen. This fix updates the state variables so that adminq_subtask will have accurate information whenever it gets scheduled. Signed-off-by: Sudheer Mogilappagari <redacted> Tested-by: Andrew Bowers <redacted> Signed-off-by: Jeff Kirsher <redacted> --- drivers/net/ethernet/intel/i40e/i40e_nvm.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index 2cf7db2dc7cd..96afef98a08f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c@@ -755,7 +755,11 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw, /* Acquire lock to prevent race condition where adminq_task * can execute after i40e_nvmupd_nvm_read/write but before state - * variables (nvm_wait_opcode, nvm_release_on_done) are updated + * variables (nvm_wait_opcode, nvm_release_on_done) are updated. + * + * During NVMUpdate, it is observed that lock could be held for + * ~5ms for most commands. However lock is held for ~60ms for + * NVMUPD_CSUM_LCB command. */ mutex_lock(&hw->aq.arq_mutex); switch (hw->nvmupd_state) {
@@ -778,7 +782,8 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw, */ if (cmd->offset == 0xffff) { i40e_nvmupd_check_wait_event(hw, hw->nvm_wait_opcode); - return 0; + status = 0; + goto exit; } status = I40E_ERR_NOT_READY;
@@ -793,6 +798,7 @@ i40e_status i40e_nvmupd_command(struct i40e_hw *hw, *perrno = -ESRCH; break; } +exit: mutex_unlock(&hw->aq.arq_mutex); return status; }
--
2.14.1