[PATCH RFC WIP 5/5] net: dsa: Don't include CPU port when adding MDB to a port
From: Andrew Lunn <andrew@lunn.ch>
Date: 2017-08-26 20:56:10
Also in:
bridge
Subsystem:
networking [dsa], networking [general], the rest · Maintainers:
Andrew Lunn, Vladimir Oltean, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Now that the MDB are explicitly added to the CPU port when required, don't add the CPU port adding an MDB to a switch port. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- net/dsa/switch.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/dsa/switch.c b/net/dsa/switch.c
index 97e2e9c8cf3f..c178e2b86a9a 100644
--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c@@ -130,7 +130,7 @@ static int dsa_switch_mdb_add(struct dsa_switch *ds, if (ds->index == info->sw_index) set_bit(info->port, group); for (port = 0; port < ds->num_ports; port++) - if (dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port)) + if (dsa_is_dsa_port(ds, port)) set_bit(port, group); if (switchdev_trans_ph_prepare(trans)) {
--
2.14.1