[for-next 1/8] net/mlx5e: Rearrange netdevice ops structures
flat view
STALE3365d
REVIEWED: 1 (0M)
From: Saeed Mahameed <hidden>
Date: 2017-08-07 10:18:34
Also in:
linux-rdma
Subsystem:
mellanox ethernet driver (mlx5e), mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers:
Saeed Mahameed, Tariq Toukan, Mark Bloch, Leon Romanovsky, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
1 review trailer.
Since we are going to allow building the driver without eswitch support, it would be possible to compile out the sriov netdevice ops struct such that the basic ops instance will be used for non VF devices too. Add missing udp tunnel ndos into mlx5e_netdev_ops_basic. While here, rearrange some ndos in the sriov ops struct and put vf/eswitch related ndos towards the end of it. Signed-off-by: Saeed Mahameed <redacted> Reviewed-by: Or Gerlitz <redacted> --- drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 57f31fa478ce..c2986777a1d8 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c@@ -3706,6 +3706,9 @@ static const struct net_device_ops mlx5e_netdev_ops_basic = { .ndo_change_mtu = mlx5e_change_mtu, .ndo_do_ioctl = mlx5e_ioctl, .ndo_set_tx_maxrate = mlx5e_set_tx_maxrate, + .ndo_udp_tunnel_add = mlx5e_add_vxlan_port, + .ndo_udp_tunnel_del = mlx5e_del_vxlan_port, + .ndo_features_check = mlx5e_features_check, #ifdef CONFIG_RFS_ACCEL .ndo_rx_flow_steer = mlx5e_rx_flow_steer, #endif
@@ -3730,13 +3733,19 @@ static const struct net_device_ops mlx5e_netdev_ops_sriov = { .ndo_set_features = mlx5e_set_features, .ndo_change_mtu = mlx5e_change_mtu, .ndo_do_ioctl = mlx5e_ioctl, + .ndo_set_tx_maxrate = mlx5e_set_tx_maxrate, .ndo_udp_tunnel_add = mlx5e_add_vxlan_port, .ndo_udp_tunnel_del = mlx5e_del_vxlan_port, - .ndo_set_tx_maxrate = mlx5e_set_tx_maxrate, .ndo_features_check = mlx5e_features_check, #ifdef CONFIG_RFS_ACCEL .ndo_rx_flow_steer = mlx5e_rx_flow_steer, #endif + .ndo_tx_timeout = mlx5e_tx_timeout, + .ndo_xdp = mlx5e_xdp, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = mlx5e_netpoll, +#endif + /* SRIOV E-Switch NDOs */ .ndo_set_vf_mac = mlx5e_set_vf_mac, .ndo_set_vf_vlan = mlx5e_set_vf_vlan, .ndo_set_vf_spoofchk = mlx5e_set_vf_spoofchk,
@@ -3745,11 +3754,6 @@ static const struct net_device_ops mlx5e_netdev_ops_sriov = { .ndo_get_vf_config = mlx5e_get_vf_config, .ndo_set_vf_link_state = mlx5e_set_vf_link_state, .ndo_get_vf_stats = mlx5e_get_vf_stats, - .ndo_tx_timeout = mlx5e_tx_timeout, - .ndo_xdp = mlx5e_xdp, -#ifdef CONFIG_NET_POLL_CONTROLLER - .ndo_poll_controller = mlx5e_netpoll, -#endif .ndo_has_offload_stats = mlx5e_has_offload_stats, .ndo_get_offload_stats = mlx5e_get_offload_stats, };
--
2.13.0