Re: [Intel-wired-lan] [PATCH] igb: support BCM54616 PHY

On Thu, Jul 27, 2017 at 12:40:01AM +0000, Brown, Aaron F wrote:

quoted

From: Intel-wired-lan [mailto:intel-wired-lan-bounces@osuosl.org] On Behalf
Of John W. Linville
Sent: Friday, July 21, 2017 11:12 AM
To: netdev@vger.kernel.org
Cc: intel-wired-lan@lists.osuosl.org; John W. Linville
[off-list ref]
Subject: [Intel-wired-lan] [PATCH] igb: support BCM54616 PHY

The management port on an Edgecore AS7712-32 switch uses an igb MAC,
but
it uses a BCM54616 PHY. Without a patch like this, loading the igb
module produces dmesg output like this:

[    3.439125] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.439866] igb: probe of 0000:00:14.0 failed with error -2

Signed-off-by: John W. Linville <redacted>
Cc: Jeff Kirsher <redacted>
---
 drivers/net/ethernet/intel/igb/e1000_82575.c   | 6 ++++++
 drivers/net/ethernet/intel/igb/e1000_defines.h | 1 +
 drivers/net/ethernet/intel/igb/e1000_hw.h      | 1 +
 3 files changed, 8 insertions(+)

I do not have the specific hardware (Edgecore switch) but as far as regression tests go this works fine.
Tested-by: Aaron Brown <redacted>

Sorry, missed the initial post, so replying to a reply.

Linux has supported the BCM54616 PHY since April 2015. If the Intel
drivers used the Linux PHY drivers, you would not of had this problem.

It would be good if somebody spent the time to migrate these MAC
drivers to use the common Linux PHY infrastructure.

	Andrew