[PATCH RFC 04/13] net: phy: add 1000Base-X to phy settings table
From: Russell King <hidden>
Date: 2017-07-25 14:02:56
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
Add the missing 1000Base-X entry to the phy settings table. This was not included because the original code could not cope with more than 32 bits of link mode mask. Signed-off-by: Russell King <redacted> --- drivers/net/phy/phy-core.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/phy/phy-core.c b/drivers/net/phy/phy-core.c
index c07845e77004..21f75ae244b3 100644
--- a/drivers/net/phy/phy-core.c
+++ b/drivers/net/phy/phy-core.c@@ -90,6 +90,11 @@ static const struct phy_setting settings[] = { { .speed = SPEED_1000, .duplex = DUPLEX_FULL, + .bit = ETHTOOL_LINK_MODE_1000baseX_Full_BIT, + }, + { + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, .bit = ETHTOOL_LINK_MODE_1000baseT_Full_BIT, }, {
--
2.7.4