Re: [PATCH 9/9] arm64: marvell: dts: add xmdio nodes for 7k/8k

Hi Antoine,
 
 On jeu., juin 08 2017, Antoine Tenart [off-list ref] wrote:

Hi Gregory,

On Wed, Jun 07, 2017 at 10:38:10AM +0200, Antoine Tenart wrote:

quoted

diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 2a99ff8fca2a..594356243ddb 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -103,6 +103,13 @@
 				clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>;
 			};
 
+			cps_xmdio: mdio@12a600 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "marvell,xmdio";
+				reg = <0x12a600 0x10>;
+			};
+

Russell pointed out on IRC the mdio/xmdio interfaces aren't wired to
anything on the mcbin. We could either disable these interfaces by
default, or add explicit disables in the mcbin device tree.

What's your thoughts on this?

I prefer that we disable it by default and only enable it on the boards
using it.

Thanks,

Gregory

Thanks!
Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com