[PATCH net-next v5 11/11] arm64: marvell: dts: add xmdio nodes for 7k/8k
flat view
DORMANTno replies
From: Antoine Tenart <hidden>
Date: 2017-06-20 08:37:54
Also in:
linux-arm-kernel, linux-devicetree
Subsystem:
arm/marvell kirkwood and armada 370, 375, 38x, 39x, xp, 3700, 7k/8k, cn9130 soc support, the rest · Maintainers:
Andrew Lunn, Gregory Clement, Sebastian Hesselbarth, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-06-15 · [PATCH net-next v5 11/11] arm64: marvell: dts: add xmdio nodes for 7k/8k · Gregory CLEMENT <hidden>
Add the description of the xMDIO bus for the Marvell Armada 7k and Marvell Armada 8k; for both CP110 slave and master. This bus is found on Marvell Ethernet controllers and provides an interface with the xMDIO bus. Signed-off-by: Antoine Tenart <redacted> --- @Dave: this patch should go through the mvebu tree as asked by Gregory, thanks! arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 8 ++++++++ arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 8 ++++++++ 2 files changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
index 576e825585c9..8b512b75aea9 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi@@ -97,6 +97,14 @@ clocks = <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; }; + cpm_xmdio: mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + cpm_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon";
diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
index 797208a11f9d..bd0c0e03edd2 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi@@ -104,6 +104,14 @@ clocks = <&cps_syscon0 1 9>, <&cps_syscon0 1 5>; }; + cps_xmdio: mdio@12a600 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,xmdio"; + reg = <0x12a600 0x10>; + status = "disabled"; + }; + cps_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon";
--
2.9.4