[PATCH 1/4] dt-bindings: Add "internal" as a valid 'phy-mode' property
flat view
STALE3398d
From: Florian Fainelli <f.fainelli@gmail.com>
Date: 2017-06-23 17:32:30
Also in:
linux-devicetree, lkml
Subsystem:
networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v1 of 2 in this series.
Revisions (2)
- v1 current
- v1
A number of Ethernet MACs have internal Ethernet PHYs and the internal wiring makes it so that this knowledge needs to be available using the standard 'phy-mode' property. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- Documentation/devicetree/bindings/net/ethernet.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index d4abe9a98109..edd7fd2bbbf9 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt@@ -11,6 +11,7 @@ The following properties are common to the Ethernet controllers: the maximum frame size (there's contradiction in ePAPR). - phy-mode: string, operation mode of the PHY interface. This is now a de-facto standard property; supported values are: + * "internal" * "mii" * "gmii" * "sgmii"
--
2.9.3