[PATCH v8 net-next 06/17] net: qualcomm: Improve readability of length defines
From: Stefan Wahren <hidden>
Date: 2017-05-29 11:57:56
Also in:
linux-devicetree, linux-serial, lkml
Subsystem:
networking drivers, qualcomm atheros qca7k ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Stefan Wahren, Linus Torvalds
In order to avoid mixing things up, make the MTU and frame length defines easier to read. Signed-off-by: Stefan Wahren <redacted> --- drivers/net/ethernet/qualcomm/qca_framing.c | 2 +- drivers/net/ethernet/qualcomm/qca_framing.h | 8 ++++---- drivers/net/ethernet/qualcomm/qca_spi.c | 12 ++++++------ 3 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/qualcomm/qca_framing.c b/drivers/net/ethernet/qualcomm/qca_framing.c
index faa924c..2341f2b 100644
--- a/drivers/net/ethernet/qualcomm/qca_framing.c
+++ b/drivers/net/ethernet/qualcomm/qca_framing.c@@ -117,7 +117,7 @@ qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by break; case QCAFRM_WAIT_RSVD_BYTE2: len = handle->offset; - if (len > buf_len || len < QCAFRM_ETHMINLEN) { + if (len > buf_len || len < QCAFRM_MIN_LEN) { ret = QCAFRM_INVLEN; handle->state = QCAFRM_HW_LEN0; } else {
diff --git a/drivers/net/ethernet/qualcomm/qca_framing.h b/drivers/net/ethernet/qualcomm/qca_framing.h
index 8b385e6..5df7c65 100644
--- a/drivers/net/ethernet/qualcomm/qca_framing.h
+++ b/drivers/net/ethernet/qualcomm/qca_framing.h@@ -44,12 +44,12 @@ #define QCAFRM_INVFRAME (QCAFRM_ERR_BASE - 4) /* Min/Max Ethernet MTU: 46/1500 */ -#define QCAFRM_ETHMINMTU (ETH_ZLEN - ETH_HLEN) -#define QCAFRM_ETHMAXMTU ETH_DATA_LEN +#define QCAFRM_MIN_MTU (ETH_ZLEN - ETH_HLEN) +#define QCAFRM_MAX_MTU ETH_DATA_LEN /* Min/Max frame lengths */ -#define QCAFRM_ETHMINLEN (QCAFRM_ETHMINMTU + ETH_HLEN) -#define QCAFRM_ETHMAXLEN (QCAFRM_ETHMAXMTU + VLAN_ETH_HLEN) +#define QCAFRM_MIN_LEN (QCAFRM_MIN_MTU + ETH_HLEN) +#define QCAFRM_MAX_LEN (QCAFRM_MAX_MTU + VLAN_ETH_HLEN) /* QCA7K header len */ #define QCAFRM_HEADER_LEN 8
diff --git a/drivers/net/ethernet/qualcomm/qca_spi.c b/drivers/net/ethernet/qualcomm/qca_spi.c
index 7e039e3..f155548 100644
--- a/drivers/net/ethernet/qualcomm/qca_spi.c
+++ b/drivers/net/ethernet/qualcomm/qca_spi.c@@ -69,7 +69,7 @@ static int qcaspi_pluggable = QCASPI_PLUGGABLE_MIN; module_param(qcaspi_pluggable, int, 0); MODULE_PARM_DESC(qcaspi_pluggable, "Pluggable SPI connection (yes/no)."); -#define QCASPI_MTU QCAFRM_ETHMAXMTU +#define QCASPI_MTU QCAFRM_MAX_MTU #define QCASPI_TX_TIMEOUT (1 * HZ) #define QCASPI_QCA7K_REBOOT_TIME_MS 1000
@@ -403,7 +403,7 @@ qcaspi_tx_ring_has_space(struct tx_ring *txr) if (txr->skb[txr->tail]) return 0; - return (txr->size + QCAFRM_ETHMAXLEN < QCASPI_HW_BUF_LEN) ? 1 : 0; + return (txr->size + QCAFRM_MAX_LEN < QCASPI_HW_BUF_LEN) ? 1 : 0; } /* Flush the tx ring. This function is only safe to
@@ -667,8 +667,8 @@ qcaspi_netdev_xmit(struct sk_buff *skb, struct net_device *dev) struct sk_buff *tskb; u8 pad_len = 0; - if (skb->len < QCAFRM_ETHMINLEN) - pad_len = QCAFRM_ETHMINLEN - skb->len; + if (skb->len < QCAFRM_MIN_LEN) + pad_len = QCAFRM_MIN_LEN - skb->len; if (qca->txr.skb[qca->txr.tail]) { netdev_warn(qca->net_dev, "queue was unexpectedly full!\n");
@@ -805,8 +805,8 @@ qcaspi_netdev_setup(struct net_device *dev) dev->tx_queue_len = 100; /* MTU range: 46 - 1500 */ - dev->min_mtu = QCAFRM_ETHMINMTU; - dev->max_mtu = QCAFRM_ETHMAXMTU; + dev->min_mtu = QCAFRM_MIN_MTU; + dev->max_mtu = QCAFRM_MAX_MTU; qca = netdev_priv(dev); memset(qca, 0, sizeof(struct qcaspi));
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html