[PATCH v2 netdev] net: phy: marvell: Limit errata to 88m1101
From: Andrew Lunn <andrew@lunn.ch>
Date: 2017-05-22 23:29:00
Subsystem:
ethernet phy library, networking drivers, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The 88m1101 has an errata when configuring autoneg. However, it was
being applied to many other Marvell PHYs as well. Limit its scope to
just the 88m1101.
Fixes: 76884679c644 ("phylib: Add support for Marvell 88e1111S and 88e1145")
Reported-by: Daniel Walker <redacted>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
v2:
Forgot netdev
drivers/net/phy/marvell.c | 67 ++++++++++++++++++++++++++---------------------
1 file changed, 37 insertions(+), 30 deletions(-)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index 88cd97b44ba6..77221d3f254f 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c@@ -267,35 +267,6 @@ static int marvell_config_aneg(struct phy_device *phydev) { int err; - /* The Marvell PHY has an errata which requires - * that certain registers get written in order - * to restart autonegotiation - */ - err = phy_write(phydev, MII_BMCR, BMCR_RESET); - - if (err < 0) - return err; - - err = phy_write(phydev, 0x1d, 0x1f); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0x200c); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1d, 0x5); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0); - if (err < 0) - return err; - - err = phy_write(phydev, 0x1e, 0x100); - if (err < 0) - return err; - err = marvell_set_polarity(phydev, phydev->mdix_ctrl); if (err < 0) return err;
@@ -328,6 +299,42 @@ static int marvell_config_aneg(struct phy_device *phydev) return 0; } +static int m88e1101_config_aneg(struct phy_device *phydev) +{ + int err; + + /* This Marvell PHY has an errata which requires + * that certain registers get written in order + * to restart autonegotiation + */ + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x1f); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x200c); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1d, 0x5); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0); + if (err < 0) + return err; + + err = phy_write(phydev, 0x1e, 0x100); + if (err < 0) + return err; + + return marvell_config_aneg(phydev); +} + static int m88e1111_config_aneg(struct phy_device *phydev) { int err;
@@ -1960,7 +1967,7 @@ static struct phy_driver marvell_drivers[] = { .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, .config_init = &marvell_config_init, - .config_aneg = &marvell_config_aneg, + .config_aneg = &m88e1101_config_aneg, .read_status = &genphy_read_status, .ack_interrupt = &marvell_ack_interrupt, .config_intr = &marvell_config_intr,
--
2.11.0